Caspar Designs

Here are kitchen and living room cabinets
in the style of Greene and Greene
It is quarter sawn Eastern White Oak


Here are the BEFORE pictures of an ugly white stained set of cabinets		Here are the AFTER pictures of the kitchen transformed
	Click on ANY Image to Enlarge












		Click on ANY Image to Enlarge








		Click on ANY Image to Enlarge

Here is a photo journal of the step by step process in the creation of a very distinct set of kitchen cabinets made of quartersawn White Oak ............ much more to come !!

The Case work is fitted before finishing
Pre-fitting the corners for installation The cabinets are laid out for the final pre-fitting before finishing The drawers are assembled and prepped for finish

All of our cabinet casework's are sprayed Inside and out with several coats of pre-catalyzed lacquer Spraying and upper cabinet before assembling the back onto the cabinet Here are the backs are sprayed The first coat is sprayed and then sanded smooth and several more coats are applied after smoothing

Click on Any Image

to Enlarge

An upper cabinet finish spayed and ready for its' back Laying Out the custom cloud lift doors Marking the "cloud lift"

Forming the "cloud lift" dry fitted and rounding over the inside detail The corners are chiseled and sanded Here are some of the door parts with the completed cloud lift detail; ..... ready for the next step

Click on Any Image

to Enlarge

Slotting for the Rosewood slot tennon
All the pieces are then machined for the quarter sawn White Oak panels All of the door frame parts ready for assembly dry fitting and measuring for the panels

Cutting out the White Oak Panels for the cloud lift detail pre-finish the panel with sanding sealer allows better assembly The White Oak door is glued up The doors will cure for 72hrs before unclamping

Click on Any Image

to Enlarge

Laying out the vertical drawer fronts All pieces are biscuit joined The plank drawer fronts before they are cut out Hand sanding each door

The finished doors ready for spray

A pair of doors after the first coat

Return to Gallery


The Case work is fitted before finishing	Pre-fitting the corners for installation	The cabinets are laid out for the final pre-fitting before finishing	The drawers are assembled and prepped for finish


All of our cabinet casework's are sprayed Inside and out with several coats of pre-catalyzed lacquer	Spraying and upper cabinet before assembling the back onto the cabinet	Here are the backs are sprayed	The first coat is sprayed and then sanded smooth and several more coats are applied after smoothing

	Click on Any Image	to Enlarge


	An upper cabinet finish spayed and ready for its' back	Laying Out the custom cloud lift doors	Marking the "cloud lift"


Forming the "cloud lift"	dry fitted and rounding over the inside detail	The corners are chiseled and sanded	Here are some of the door parts with the completed cloud lift detail; ..... ready for the next step

	Click on Any Image	to Enlarge


Slotting for the Rosewood slot tennon	All the pieces are then machined for the quarter sawn White Oak panels	All of the door frame parts ready for assembly	dry fitting and measuring for the panels


Cutting out the White Oak Panels for the cloud lift detail	pre-finish the panel with sanding sealer allows better assembly	The White Oak door is glued up	The doors will cure for 72hrs before unclamping

	Click on Any Image	to Enlarge


Laying out the vertical drawer fronts	All pieces are biscuit joined	The plank drawer fronts before they are cut out	Hand sanding each door


The finished doors ready for spray			A pair of doors after the first coat